Re: Having trouble with code upload... XCode

Posted by Seth on Dec 28, 2016; 10:48pm
URL: http://bluesaab-forum.90.s1.nabble.com/Having-trouble-with-code-upload-XCode-tp879p895.html

So R13 should actually be a 10k (1002 code) not a 100k (1003 code). That's why the board isn't being recognized properly.

It is a v4.1 board right?

On Wed, Dec 28, 2016 at 17:58 saabstutz [via BlueSaab Forum] <[hidden email]> wrote:

Well that was easy. Added Karlis's quick fix, and powered up right away.



For me R13, is a 1003 rotated 180 degrees (as compared to R14 and the writing on the board) R14 is a correctly rotated 1003. They say 100K next to them on the board, but I don't have a multimeter so unfortunately I cannot get a real world reading on that.



R11 is a 223, marked as 22K, if that matters.



What command gives me the revision check number? I remember seeing it earlier but can't find it again...

If you reply to this email, your message will be added to the discussion below:

http://bluesaab-forum.2349123.n4.nabble.com/Having-trouble-with-code-upload-XCode-tp879p894.html

To start a new topic under Software, email [hidden email]


To unsubscribe from Software, click here.


NAML