Re: Presentation

Posted by Da Bear on Dec 18, 2015; 7:16pm
URL: http://bluesaab-forum.90.s1.nabble.com/Presentation-tp80p84.html

Thanks! :)

Is the problem independent of how the mic is wired for low or high output? Have not seen anyone mention that.

Quote from http://www.kolumbus.fi/richard.bevan/saab/saab95/phones.html
"The quality of the factory microphone in my car was really bad - noone could understand a word I said. So I opened up the roof console and replaced the factory microphone with the one from the Nokia hands free kit. If you do have problems with the factory microphone then it has a high and low output - Pin1=high output. Pin2=low output. Pin3=ground. Switch the pins around in the connector if you want to try and improve the sound."

When I got my car the HF was wired with the SE mic and sounded crap. I switched to the built in mic - still crap. Then switched pin 1 to position 2 and, woala! Perfect.

Just a thought ;)

/Björn