Re: BlueSaab Amp pcb!

Posted by sbt on Nov 29, 2016; 5:35am
URL: http://bluesaab-forum.90.s1.nabble.com/BlueSaab-Amp-pcb-tp737p835.html

Seth wrote

BOM: http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=7386d4e698

I note this BoM is currently missing a 2.2kΩ resistor for R14. For example, could use Vishay P/N CRCW08052K20FKEA or KOA Speer P/N RK73H2ATTD2201F.

If you built a v5.0 BlueSaab PCB, you might have some Vishay 2.2kΩ resistors left over, especially if you switched any LED resistors to 10kΩ.

Same applies to the legacy amp PCB.

Cheers,
Sam.