Re: BlueSaab Legacy Amp PCB?

Posted by sbt on Nov 16, 2016; 3:00pm
URL: http://bluesaab-forum.90.s1.nabble.com/BlueSaab-Legacy-Amp-PCB-tp785p802.html

Sure, the pcb mounting is a serious concern. There are two options I can see:

1) mod the legacy amp pcb so that it's wider and extends to the mounting bosses and mount the orginal board upside down at the top of the box. Then, the connect/disconnect strain goes directly to the bosses; or at least two of the them near the connector.
2) stick with the plan I suggested, but replace the internal mounting screws for the CDC connector with longer screws and bushes that clamp the two boards together with the connector as well.