Re: BlueSaab Legacy Amp PCB?

Posted by saab95 on Nov 16, 2016; 10:53am
URL: http://bluesaab-forum.90.s1.nabble.com/BlueSaab-Legacy-Amp-PCB-tp785p796.html

As an interim solution until the main board supports amp, covering an external amp board with heat shrink tubing would work fine for me :-)

Regarding the cable I linked to: I was merely inquiring if this was the correct connector. Where can I buy one of these connectors?

Ethernet cable, probably not a good idea in the long run to use such small cables...

A thought:
Is it possible to fit the amp board inside the existing box and desolder the conncetor. Solder wires from the main board to the amp, solder wires from the amp board to the connector. For this to work you'd to fit and fix the amp inside the box and bend som of the pins on the connector...