Re: BlueSaab with '04 9-5 AS3 with Denso NAV

Posted by Karlis on Aug 12, 2016; 5:57pm
URL: http://bluesaab-forum.90.s1.nabble.com/BlueSaab-with-04-9-5-AS3-with-Denso-NAV-tp581p651.html

I had a similar problem long time ago (with one of first RN52 based modules I made). Turned out to be a short on RN52. I applied the flux on the pins generously and went over them with soldering iron @ 350C with a "drag" method. It has to be done quickly and with a steady hand. If everything goes well, the pins should take as much solder as they need and not more and the excess solder should stick on the iron. That way you could get clean connections.

Hope this helps.