Re: Building myself a BlueSaab!
Posted by Karlis on Jun 07, 2016; 8:08pm
URL: http://bluesaab-forum.90.s1.nabble.com/Building-myself-a-BlueSaab-tp417p430.html
You'll have to make a hole that is ~2-3mm larger than the connector itself. Otherwise it will be really hard to fit the assembled module into enclosure as you'll have to slide it in at an angle.
Having made like ten of these modules and enclosures, I just use my "test" module to match the size of connector, then mark it with a permanent marker and then use an automated mill to cut the hole.
URL: http://bluesaab-forum.90.s1.nabble.com/Building-myself-a-BlueSaab-tp417p430.html
You'll have to make a hole that is ~2-3mm larger than the connector itself. Otherwise it will be really hard to fit the assembled module into enclosure as you'll have to slide it in at an angle.
Having made like ten of these modules and enclosures, I just use my "test" module to match the size of connector, then mark it with a permanent marker and then use an automated mill to cut the hole.
2001 9-5 SE V6; 2006 9-5 Wagon; iOS; BlueSaab version = "latest and greatest" :)
| Free forum by Nabble | Edit this page |