Re: Building myself a BlueSaab!

Posted by Trionic Seven on Jun 07, 2016; 7:24pm
URL: http://bluesaab-forum.90.s1.nabble.com/Building-myself-a-BlueSaab-tp417p425.html

So I think I got everything soldered up (except the usb connector...wow..those pins were so hard to get right I ended up de-soldering it completely).

I can input 12v to the correct pins but there is only light on the power led. Nothing else.

Note that I haven't flashed any bootloader or software to the atmega yet. I am also not sure if all the chips survived the soldering. Maybe something's dead.

Before I continue: Should I expect anything more than the power led when I connect 12v? The power draw of the whole system is around 14 mA.