RE: How-to/tutorial?

Posted by Seth on Mar 31, 2016; 4:12pm
URL: http://bluesaab-forum.90.s1.nabble.com/How-to-tutorial-tp106p312.html

Sounds like it may be an old software issue. Definitely try to get the latest code; it’s posted somewhere here on the (software) forum, and maybe Karlis can chime in when he can; he’s the resident software expert J

 

From: homerisback [via BlueSaab Forum] [mailto:[hidden email]]
Sent: Thursday, March 31, 2016 11:16 AM
To: se4587 <[hidden email]>
Subject: Re: How-to/tutorial?

 

Thanks, so CAN wires aren't swapped, good point.
I'll check the resonators solder but they were among the easiest parts to solder, so I'm confident in these through-hole solderings. I'll have a close look at them anyway.

I double checked the software version because it shows "2.0" in Arduino-IDE software, even from the 2.1 zip file.
I only used the Arduino-IDE zip file to flash my 328, is that enough ? Because I saw the other zip file available to download is much bigger. Maybe some code is missing...

No trouble reported in Tech2 with DICE/ECU & friends. I should find a real CDC to lend to check if it works ; maybe the module is OK and the issue is hidden elsewhere !

---

If you reply to this email, your message will be added to the discussion below:

http://bluesaab-forum.2349123.n4.nabble.com/How-to-tutorial-tp106p311.html

To start a new topic under BlueSaab Forum, email [hidden email]
To unsubscribe from BlueSaab Forum, click here.
NAML