Re: How-to/tutorial?

Posted by Seth on Mar 31, 2016; 12:37pm
URL: http://bluesaab-forum.90.s1.nabble.com/How-to-tutorial-tp106p310.html

CAN H = green.
CAN L = white.

if you're having such intermittent issues...makes me wonder if you have a bad connection somewhere, or maybe one of the crystal resonators isn't soldered (bad solder joint?)...

if you can take pics, feel free to post them or send them to me, i can take a look.

if you have the latest software, 2.1, you should be good there; the timing was adjusted properly.

the software doesn't check the VIN for anything (doesn't need to, doesn't care)...but maybe with you swapping stuff around, there's another issue? dice/twice/ecu having trouble?

the atmega328 and atmega328p are virtually identical, one just has low power mode available, which we're not using, so therefore irrelevant to this project. the only issue that causes is with uploading; the avr upload program likes to match a known chip id, and those 2 chips have different id's. but if you're over that hurdle, then i see no problem there.