Re: How-to/tutorial?

Posted by Seth on Mar 29, 2016; 6:44pm
URL: http://bluesaab-forum.90.s1.nabble.com/How-to-tutorial-tp106p304.html

if you're using pcb v3.3 and the latest code (?), the rn52 is the only thing that will go to sleep; I'm 99.9% sure the can light(s) will still flash, as the can bus is active 24/7. Don't worry too much; the module only pulls like 25mA. With the rn52, it pulls less than 50mA, and even then, sometimes less, depending what mode it's in.

Maybe in the future we'll be able to figure out some sleep code for the 328; it still needs to be able to talk to the canbus, so i think we could put it in a sleep mode where the clock/timer was still active so the 328 could wake up again on seeing a certain canbus command, and/or an rn52 command....