Re: How-to/tutorial?

Posted by Seth on Mar 20, 2016; 1:12am
URL: http://bluesaab-forum.90.s1.nabble.com/How-to-tutorial-tp106p286.html

The pads under the rn52 are grounds. You can't solder them with an iron. The only way you could solder them is by reflow soldering. They're not required to work. Don't worry about them.

Karlis is good at drag soldering, but that takes practice.  I haven't drag soldered those myself, I choose to do them one by one. Whatever you're most comfortable with.

You will need the 6 pin header to upload code to the 328 if you don't upload code to the 328 before installing it on the board. I'll add it to the bom.