Re: PCB v3.3a

Posted by Viggen on Feb 28, 2016; 3:52pm
URL: http://bluesaab-forum.90.s1.nabble.com/PCB-v3-3a-tp222p249.html

Hey I just put together my first Adapter using this board and had a few questions....

I ordered the parts list from Mouser for the older versions of the boards that didn't have these updates so I'm missing a couple of pieces and want to figure out what I should order. From the printing on the board it looks like the added R15 is 10K, C10 is 0.1uF, R14 is 100k, but I don't see anything for R13 or the 9600_EN jumper. Can anyone tell me what is supposed to go in the last two spots?

I luckily have some spares so I can fill C10 and R15, but R13 just says 'Revision' and I'm not sure what if anything I'm supposed to put on the 9600_EN jumper or if that is for future use too...

Thanks!