Re: BlueSaab 6.1 - No "BlueSaab" Bluetooth device available after power up

Posted by Karlis on
URL: http://bluesaab-forum.90.s1.nabble.com/BlueSaab-6-1-No-BlueSaab-Bluetooth-device-available-after-power-up-tp1492p1839.html

Since you have access to console (as you mentioned earlier, you see RN52 configuration completed! message on terminal), you could try using some of BlueSaab 6.1.1 built-in debug commands to fix the issue you're experiencing.

On serial console (while connected to BlueSaab, of course), try typing in "V" and pressing return key. This will instruct RN52 module to become discoverable. Another option is to try "B" command which will reboot RN52 module but will leave STM32 running.

For a complete set of debug commands, type "H".

Hope this helps.