Re: BlueSaab 6.1 - No "BlueSaab" Bluetooth device available after power up

Posted by kunte_o on Jun 13, 2022; 10:27pm
URL: http://bluesaab-forum.90.s1.nabble.com/BlueSaab-6-1-No-BlueSaab-Bluetooth-device-available-after-power-up-tp1492p1837.html

Hi,

seems unnecessary to open a new separate thread due to a similar problem I've got. I am unable to access discoverable mode of RN52.

I managed to build a v6 BlueSaab module. I successfully flashed it with v6.1.1 version of FW (no-sid version due to SPA present), but as mentioned above I am unable to get it to discoverable mode.

I've got the green LED for CAN-bus heartbeat, but only blue sporadic flashing from RN52 (indicating it is only connectable, not discoverable).

SID shows "CD PLAY 01" after double push of CD selector, so the communication is there and the car is aware of the module, but device does not pop up in a list of discoverable devices after pressing "1" button (no button seems to be affecting anything).

On UART2 I am getting messages:
BlueSaab
Hardware version: v6.1
Software version: v6.1
Configuring RN52...
RN52 configuration completed!

which should signify RN52 is set up. Still, for some reason I am unable to make it visible and pair it. Next step I would like to try is to reset RN52 to it's factory settings, if this won't help...I have no idea what to investigate further.

I would be grateful for any hint.