BlueSaab 6.1 - No Response from Target

Posted by sdaly17 on
URL: http://bluesaab-forum.90.s1.nabble.com/BlueSaab-6-1-No-Response-from-Target-tp1794.html

Hi,

I just finished assembling my first BlueSaab 6.1 board, and I'm not sure if the board is functioning correctly. Currently, I only get a solid red power LED, a solid green LED on the board, and an error stating that there is no response from the target when I attempt to flash it from Windows.

The only change I made from the provided BOM was swapping the STM32F103RBT7 for an STM32F103RBT6 that I removed from an STM Nucleo board due to the chip shortage.

I am not sure if the issue would be related to the microchip itself or another problem on the board.

Any help would be greatly appreciated!