Re: Some advice for beginner please

Posted by not_me_really on Jun 25, 2020; 2:17pm
URL: http://bluesaab-forum.90.s1.nabble.com/Some-advice-for-beginner-please-tp1649p1668.html

I`ve now followed the traces from the bluetooth module to the STM chip and reflowed those.

On my bench, I then had BlueSaab v6 show up on bluetooth, but failed to connect.

I then thought I`d try it in the car, but the bluetooth never showed up.

I'm beginning to think that all of my problems are related to the soldering on the STM chip.

I used my hot air gun to do the resonator (which I now think was always working), and I think that reflowed that side of the STM chip.

I think I`m getting closer to a working BlueSaab!


Frank.