Login  Register

Re: BlueSaab starts on bench, not in car

Posted by Karlis on Jun 24, 2020; 6:24pm
URL: http://bluesaab-forum.90.s1.nabble.com/BlueSaab-starts-on-bench-not-in-car-tp1657p1659.html

I'd start with putting a debug print in, say, CDC.cpp line 121; maybe another one in setup or loop. CDC.cpp debug print will show you if CAN bus comms are actually working and BlueSaab sees any CAN frames on the bus. A print in setup or loop will tell you if the firmware is actually running.

Once prints are put in the code, plug the module in the car and observe serial console.
2001 9-5 SE V6; 2006 9-5 Wagon; iOS; BlueSaab version = "latest and greatest" :)