Re: Some advice for beginner please

Posted by Karlis on Jun 24, 2020; 4:35pm
URL: http://bluesaab-forum.90.s1.nabble.com/Some-advice-for-beginner-please-tp1649p1656.html

My recommendation for flashing the module under MS Windows is to use Flasher-STM32 tool by STMicro. STM32CubeProgrammer might have written the flash file in different memory space so bootloader can't reach it. The correct address from which to start the write is 0x800000. That's flash.

The fact that only power LED turns on when module is connected to the car, means that firmware is not running and is not booting up CAN, nor Bluetooth module.

Hope this helps.