Re: Issues Flashing V6.1 Bootloader and Firmware

Posted by Karlis on Jun 05, 2020; 12:29am
URL: http://bluesaab-forum.90.s1.nabble.com/Issues-Flashing-V6-1-Bootloader-and-Firmware-tp1625p1632.html

The baudrate should be set to 115200.

1. Press and hold BOOT0 button
2. While holding BOOT0, press and release RESET button
3. Release BOOT0 button

Now STM32 should be in DFU mode and accept firmware over UART1.