Re: BlueSaab 6.1 - No "BlueSaab" Bluetooth device available after power up

Posted by 1S2A1B on
URL: http://bluesaab-forum.90.s1.nabble.com/BlueSaab-6-1-No-BlueSaab-Bluetooth-device-available-after-power-up-tp1492p1578.html

Okay, I've managed to flash the 6.1.1 firmware. Now I'm getting pretty much exactly the same LED activity seen in the original post: red-blue-green quickly for a few seconds, then a green pulse with the blue flashes which keeps going. So far no luck searching for the BT device though.

When I attach the RX and TX wires over to UART3, open the serial port with PuTTY w/ 115200 baud, each reset gives me "R,1,104Saab v6". After a few seconds the R changes to a Q. Moving the RX and TX over to UART2 as you requested, I haven't been able to get a readout.

I did struggle with alignment while installing the STM32. Appears I got it all sorted, but no surprise if she got too hot and bothered.