Re: BlueSaab 6.1 - No "BlueSaab" Bluetooth device available after power up
Posted by
Karlis on
Oct 02, 2019; 3:42pm
URL: http://bluesaab-forum.90.s1.nabble.com/BlueSaab-6-1-No-BlueSaab-Bluetooth-device-available-after-power-up-tp1492p1541.html
So one more thing you can check (and this is CAN specific) - if LED pulses in green every second or so. That's an indication, that STM32 is packing and putting a CAN frame on the bus. Now, wether the frame actually makes to the bus through the transceiver is another question, but this should give you a good indication as to what STM32 is doing.
As for code - I'm using Eclipse with ARM GCC package. Even without that, if you connect to UART2 and issue "H" (no quotes), you'll see a few debug commands (including invoking of voice assistant) that should exercise RN52 mic-in.
2001 9-5 SE V6; 2006 9-5 Wagon; iOS; BlueSaab version = "latest and greatest" :)