Login  Register

Re: BlueSaab 6.1 - No "BlueSaab" Bluetooth device available after power up

Posted by czabel on Sep 24, 2019; 4:53pm
URL: http://bluesaab-forum.90.s1.nabble.com/BlueSaab-6-1-No-BlueSaab-Bluetooth-device-available-after-power-up-tp1492p1535.html

Karlis wrote
If everything is fine, you should see blue and red LEDs flash simultaneously for ~3 seconds and then switch over to a mode where blue and red LEDs flash alternatively indicating that RN52 is in "Discoverable/Connectable" (Pairing) mode. If that's the case, RN52 is alive and what you should see in your phone's Bluetooth settings is a device named "RN52-XXXX" where "XXXX" is the last four characters of particular RN52 modules BD_ADDR (MAC address).
Thanks Karlis.

She's dead as well. Time to start fresh! I'll update you guys when I get all my new parts in and assembled... And I'll be much more methodical this time. Power track first, check the RN52 off the board, etc. And now I've got more SMD soldering practice, so I should do better this next time. I'll work on the How To document in the meantime.

Thanks for your help guys.
2000 9-5 Aero 5-Speed