Re: BlueSaab 6.1 - No "BlueSaab" Bluetooth device available after power up

Posted by czabel on Sep 19, 2019; 3:25am
URL: http://bluesaab-forum.90.s1.nabble.com/BlueSaab-6-1-No-BlueSaab-Bluetooth-device-available-after-power-up-tp1492p1511.html

1. According to my OSHPark order, and the silkscreen on the board, I am using 6.1.1
2. No output on UART2
3. Here are some pictures:







4. THIS is the part I purchased. Directly out of the provided DigiKey BOM.

Other notes:
I've verified the LDO is operating correctly, putting out the required 3V.
Both the RN52 and the ST chip are receiving the voltages they need.
The LEDs all work using a multimeter in Diode mode.

Please let me know if there's anything else you need to know to help troubleshoot.

Thank you for your help!