Re: BlueSaab 6.1 - No "BlueSaab" Bluetooth device available after power up

Posted by czabel on Sep 13, 2019; 5:02am
URL: http://bluesaab-forum.90.s1.nabble.com/BlueSaab-6-1-No-BlueSaab-Bluetooth-device-available-after-power-up-tp1492p1506.html

Yes, I broke out the yellow and orange pins from the USB cable, and connected to the pin headers labelled UART2 TX & RX, as you specified in your previous post.

The RGB LED is installed correctly, I just toned out each trace to ensure VCC is connected to the right pin, pulled up the datasheet to confirm the orientation of the LED. They light up when using my multimeter in diode mode.