Re: BlueSaab v5.x

Posted by Weby on Mar 07, 2019; 7:00pm
URL: http://bluesaab-forum.90.s1.nabble.com/BlueSaab-v5-x-tp1379p1383.html

Too eager to connect it before getting the connector, I made myself a small "adapter" harness to solder on the board.

Everything works, but the can bus.

I got the CANL and CANH LEDS to blink for approximately 5 seconds, and then no matter what I did, nothing works. The car doesn't detect the module obviously, and turning the ignition on/off doesn't change anything.

The bluetooth connectivity works apparently.

I also once got the TX and RX leds to be on somehow, I don't know why. They never turned back on after I unplugged/replugged the device.

Is it a fair assumption that one of the tracks is probably badly soldered ?

Is it possibly a firmware issue ?