Functions currently supported by the software

Posted by Karlis on Jan 07, 2016; 2:46am
URL: http://bluesaab-forum.90.s1.nabble.com/Functions-currently-supported-by-the-software-tp123.html

Defaults

*) When a new device is added to RN52 PDL (Paired Device List), basically till now RN52 "wasn't aware of such device", the volume gain is set to default of 11 out of 15.
*) When entering CDC mode (pressing of CD/RDM button twice on IHU) the RN52 bluetooth module will attempt to connect to the last device it was connected to.
*) When a successful bluetooth connection has been established between RN52 and audio source (e.g. iPhone), the RN52 is instructed to turn on the volume gain to max via SS,0F command.
*) When turning the ignition, IHU off or switching away from CDC mode on IHU (may it be Radio or Tape), the RN52 will disconnect from the last device it was connected to.

Buttons on 9-3s

*) NXT button on steering wheel -> "Play/Pause"
*) SRC+ button on steering wheel -> "Next Track"
*) SRC- button on steering wheel -> "Previous Track"
*) SEEK+ button long press on IHU -> "Force RN52 to go into discoverable mode"
*) SEEK- button long press on IHU -> "Force RN52 to go into non-discoverable/connectable"
*) Button "1" on IHU -> "Turn RN52 volume up by one level"
*) Button "4" on IHU -> "Turn RN52 volume down by one level"
*) Button "2" on IHU -> "Turn RN52 volume to max (send SS,0F command)"
*) Button "3" on IHU -> "Reconnect to the last known device"
*) Button "6" on IHU -> "Disconnect from the last known device"


Buttons on 9-5s

*) NXT button on steering wheel -> "Play/Pause"
*) SRC+ button on steering wheel -> "Next Track"
*) SRC- button on steering wheel -> "Previous Track"
*) SEEK+ button press on IHU -> "Next Track"
*) SEEK- button press on IHU -> "Previous Track"
*) Long press of SEEK button in the middle on IHU till one beep -> "Force RN52 to go into discoverable mode"
*) Further holding down SEEK button in the middle on IHU till the second beep -> "Force RN52 to go into non-discoverable/connectable"
*) Long press of CD/RDM button on IHU -> "Force RN52 to increase the volume gain by one step"
*) Button "1" on IHU -> "Turn RN52 volume up by one level"
*) Button "4" on IHU -> "Turn RN52 volume down by one level"
*) Button "2" on IHU -> "Turn RN52 volume to max (send SS,0F command)"
*) Button "3" on IHU -> "Reconnect to the last known device"
*) Button "6" on IHU -> "Disconnect from the last known device"


I'll keep this list updated as new functions/fixes come in.

Let me know if you have any questions.