Re: How to: RN52 programming and configuration (+video)

Posted by homerisback on Jul 19, 2017; 2:41pm
URL: http://bluesaab-forum.90.s1.nabble.com/How-to-RN52-programming-and-configuration-video-tp349p1149.html

I have a friend's v3.2 back home for a software update as well as a RN52 settings update (to enable SID scroller), I'll follow my previously described procedure and let you know if I mixed or forgot sth...

UPDATE : Just did it and everything worked flawlessly with my Arduino Uno board :)
- RN52-PRG sketch uploaded in Arduino Uno board
- Atmega328 from BlueSAAB removed
- 3v3 and GND on FTDI header
- UART RX to Uno's pin 5 & UART TX to Uno's pin 6
- GPIO9 to GND
Using Arduino IDE software under Win 7.